Transport platform WPT.002
The transport platform WPT.002 is designed mainly for rail transport for horizontal and sloping transport ways of the elements of sections of the mechanised linings and also mine face machines and other materials. It may also be used as a transport undercarriage which needs to be mobile.
All the elements that are transported by means of this platform should be properly fastened to it using the fastening points as stated by the platform producer or the ones produced on one’s own account (after the coordination with the producer) that will not weaken the platform’s construction and will not negatively influence its usage.
Any transport should take place according to the conditions given in the technical documentation (DTR), as well as the current procedures (the Ordinance of the Minister of Economy from the 28th of June, 2002, ‘Industrial safety, transport and specialist fire security in the underground mine plants’, Journal of Laws, number 139, year 2002, pos.1169 and Journal of Laws, number 124, year 2006, position 863).
The platform may be used in the underground excavations in ‘a’, ‘b’, ‘c’ –graded compartments (methane explosion hazard), as well as A and B class for the hazard of pulverised coal explosion.
The platform’s technical data:
Mine Office (WUG) admission GM-54/06
Maximum load capacity Qł = 120 kN
Length L = 2440 mm to 3540 mm
Breadth B = 900 mm to 1650 mm
Height H = 375 mm
Rail’s breadth S = 470 mm to 1000 mm
Wheel set’s wheel base a = 1000 mm to 1750 mm
Coupling’s height h = 300 mm
Road wheel’s diameter D = 350 mm
Minimum radius of the rail arc R = 8 m
Maximum velocity of transport (no load) on straight roads Vpp = 5 m/s
Maximum velocity of transport (with load) on straight roads Vtp= 1 m/s
Transport platform WPT.002M
The transport platform WPT.002 is designed mainly for rail transport for horizontal and sloping transport ways of the elements of sections of the mechanised linings and also mine face machines and other materials. It may also be used as a transport undercarriage which need to be mobile.
All the elements that are transported by means of this platform should be properly fastened to it using the fastening points as stated by the platform producer or the ones produced on one’s own account (after the coordination with the producer) that will not weaken the platform’s construction and will not negatively influence its usage.
Any transport should take place according to the conditions given in the technical documentation (DTR), as well as the current procedures (the Ordinance of the Minister of Economy from the 28th of June, 2002, ‘Industrial safety, transport and specialist fire security in the underground mine plants’, Journal of Laws, number 139, year 2002, pos.1169 and Journal of Laws, number 124, year 2006, position 863).
The platform may be used in the underground excavations in ‘a’, ‘b’, ‘c’ –graded compartments (methane explosion hazard), as well as A and B class for the hazard of pulverised coal explosion.
The platform’s technical data:
Mine Office (WUG) admission GM-119/06
Maximum load capacity Qł = 120 kN
Length L1 = 3500 mm
Breadth B1 = 960 mm
Height H2 = 370 mm
Rail’s breadth S = 600 mm
Wheel set’s wheel base a = 1200 mm
Coupling’s height h = 195 mm
Road wheel’s diameter D = 350 mm
Minimum radius of the rail arc R = 8 m
Maximum velocity of transport (no load) on straight roads Vpp = 5 m/s
Maximum velocity of transport (with load) on straight roads Vtp= 1 m/s
Transport platform WPT.003W
The transport platform WPT.002 is designed mainly for rail transport for horizontal and sloping transport ways of the elements of sections of the mechanised linings and also mine face machines and other materials.
The transport of a load of the set’s mass (i.e. the transported load and the platform’s mass) exceeding 3000 kg on sloping transport ways of the inclination angle over 15°, cannot be secured by rail catchers.
All the elements that are transported by means of this platform should be properly fastened to it using the fastening points as stated by the platform producer or the ones produced on one’s own account (after the coordination with the producer) that will not weaken the platform’s construction and will not negatively influence its usage.
Any transport should take place according to the conditions given in the technical documentation (DTR), as well as the current procedures (the Ordinance of the Minister of Economy from the 28th of June, 2002, ‘Industrial safety, transport and specialist fire security in the underground mine plants’, Journal of Laws, number 139, year 2002, pos.1169 and Journal of Laws, number 124, year 2006, position 863).
The platform may be used in the underground excavations in ‘a’, ‘b’, ‘c’ –graded compartments (methane explosion hazard), as well as A and B class for the hazard of pulverised coal explosion.
The platform’s technical data:
Mine Office (WUG) admission GM-111/07
Maximum load capacity Qł = 60 kN
Length L = 3120 mm
Breadth B = 800 mm to 1100 mm
Height H = 406 mm
Rail’s breadth S = 470 mm to 950 mm
Wheel set’s wheel base a = 1000 mm to 1200 mm
Coupling’s height h = 296 mm
Road wheel’s diameter D = 350 mm
Minimum radius of the rail arc R = 8 m
Maximum velocity of transport (no load) on straight roads Vpp = 5 m/s
Maximum velocity of transport (with load) on straight roads Vtp= 3 m/s
Transport platform WPT.005M
The transport platform WPT.002 is designed mainly for rail transport for horizontal and sloping transport ways of the wall heading machines, as well as spoons and drums with cables and ropes and also colts of conveying belts.
In case of transporting of spoons and drums with cables or ropes, it is admissible to transport them on a platform using stands that are adjusted to the platform’s construction, as well as to assembly devices onto the platform which allow the devices’ unfolding.
The abovementioned spoons and drums can be transported directly onto the skid plate of the platform. All the elements that are transported by means of this platform should be properly fastened to it using the fastening points as stated by the platform producer or the ones produced on one’s own account (after the coordination with the producer) that will not weaken the platform’s construction and will not negatively influence its usage.
Any transport should take place according to the conditions given in the technical documentation (DTR), as well as the current procedures (the Ordinance of the Minister of Economy from the 28th of June, 2002, ‘Industrial safety, transport and specialist fire security in the underground mine plants’, Journal of Laws, number 139, year 2002, pos.1169 and Journal of Laws, number 124, year 2006, position 863).
The platform may be used in the underground excavations in ‘a’, ‘b’, ‘c’ –graded compartments (methane explosion hazard), as well as A and B class for the hazard of pulverised coal explosion.
The platform’s technical data:
Mine Office (WUG) admission GM-144/05
Maximum load capacity Qł = 50 kN
Length L = 3020 mm
Breadth B = 700 mm to 1236 mm
Height H = 430 mm and 383 mm
Rail’s breadth S = 470 mm to 1000 mm
Wheel set’s wheel base a = 1750 mm
Coupling’s height (by means of a link) h1 = 310 mm (S = 470 mm to 950 mm)
Coupling’s height (by means of a hook) h2 = 220 mm (S = 470 mm to 950 mm)
h2 = 290 mm (S = 1000 mm)
Road wheel’s diameter D = 350 mm (S = 470 mm to 950 mm)
Minimum radius of the rail arc R = 9 m
Maximum velocity of transport (no load) on straight roads Vpp = 5 m/s
Maximum velocity of transport (with load) on straight roads Vtp= 1 m/s
Transport platform WPT.007M
The transport platform WPT.007M is designed mainly for rail transport for horizontal and sloping transport ways of elements of sections of the mechanised linings and also mine face machines and other materials whose construction unables their transport in the horizontal position (when placed on the transport means). The abovementioned elements may be transported on the platform in the horizontal position only if their placement on the platform skid plate does not exceed the allowed transport clearance gauge.
All the elements that are transported by means of this platform should be properly fastened to it using the fastening points as stated by the platform producer or the ones produced on one’s own account (after the coordination with the producer) that will not weaken the platform’s construction and will not negatively influence its usage.
Any transport should take place according to the conditions given in the technical documentation (DTR), as well as the current procedures (the Ordinance of the Minister of Economy from the 28th of June, 2002, ‘Industrial safety, transport and specialist fire security in the underground mine plants’, Journal of Laws, number 139, year 2002, pos.1169 and Journal of Laws, number 124, year 2006, position 863).
The platform may be used in the underground excavations in ‘a’, ‘b’, ‘c’ –graded compartments (methane explosion hazard), as well as A and B class for the hazard of pulverised coal explosion.
The platform’s technical data:
Mine Office (WUG) admission GM-10/07
Maximum load capacity Qł = 140 kN
Length L = 2450 mm to 3540 mm
Breadth B = 950 mm to 1650 mm
Height H1 = max. 1500 mm
Rail’s breadth S = 470 mm to 1000 mm
Wheel set’s wheel base a = 1750 mm
Platform’s height (with stanchions) H1 = 1500 mm max.
Platform’s height (without stanchions) H2 = 375 mm max.
Rail’s breadth S = 4700 mm to 1000 mm
Wheel set’s wheel base a = 1000 mm to 1200 mm
Coupling’s height (by means of a hook) h1 = 295 mm
Height of the sprag coupling h2 = 285 mm
Road wheel’s diameter D = 350 mm (S = 470 mm to 950 mm)
Minimum radius of the rail arc R = 9 m
Maximum velocity of transport (no load) on straight roads Vpp = 5 m/s
Maximum velocity of transport (with load) on straight roads Vtp= 1 m/s
Transport platform WPT.008M
The transport platform WPT.008M is designed mainly for rail transport for horizontal and sloping transport ways of the elements of sections of the mechanised linings and also mine face machines and other materials.
All the elements that are transported by means of this platform should be properly fastened to it using the fastening points as stated by the platform producer or the ones produced on one’s own account (after the coordination with the producer) that will not weaken the platform’s construction and will not negatively influence its usage.
Any transport should take place according to the conditions given in the technical documentation (DTR), as well as the current procedures (the Ordinance of the Minister of Economy from the 28th of June, 2002, ‘Industrial safety, transport and specialist fire security in the underground mine plants’, Journal of Laws, number 139, year 2002, pos.1169 and Journal of Laws, number 124, year 2006, position 863).
The platform may be used in the underground excavations in ‘a’, ‘b’, ‘c’ –graded compartments (methane explosion hazard), as well as A and B class for the hazard of pulverised coal explosion.
Mine Office (WUG) admission GM-32/06 and GM – 33/06
Maximum load capacity of the A platform Qł = 200 kN
Maximum load capacity of the B platform Qł = 300 kN
Length L = 2450 mm to 3540 mm
Breadth B = 950 mm to 1650 mm
Height H1 = 385 mm
Rail’s breadth S = 470 mm to 1000 mm
Wheel set’s wheel base a1 = 1000 mm to 1750 mm
Coupling’s height (by means of a hook) h1 = 295 mm
Height of the sprag coupling h2 = 285 mm
Road wheel’s diameter D = 350 mm
Minimum radius of the rail arc R = 8 m
Maximum velocity of transport (no load) on straight roads Vpp = 5 m/s
Maximum velocity of transport (with load) on straight roads Vtp= 1 m/s
Transport platform WPT.010
The transport platform WPT.002 is designed mainly for rail transport for horizontal and sloping transport ways of the elements of sections of the mechanised linings and also mine face machines and other materials.
The platform’s low construction does not allow its cooperation with rail catchers and it may collide with the rest of built-in rail devices.
All the elements that are transported by means of this platform should be properly fastened to it using the fastening points as stated by the platform producer or the ones produced on one’s own account (after the coordination with the producer) that will not weaken the platform’s construction and will not negatively influence its usage.
Any transport should take place according to the conditions given in the technical documentation (DTR), as well as the current procedures (the Ordinance of the Minister of Economy from the 28th of June, 2002, ‘Industrial safety, transport and specialist fire security in the underground mine plants’, Journal of Laws, number 139, year 2002, pos.1169 and Journal of Laws, number 124, year 2006, position 863).
The platform may be used in the underground excavations in ‘a’, ‘b’, ‘c’ –graded compartments (methane explosion hazard), as well as A and B class for the hazard of pulverised coal explosion.
Mine Office (WUG) admission GM-18/07 and GM – 19/07
Maximum load capacity of the A platform Qł = 200 kN
Maximum load capacity of the B platform Qł = 300 kN
Length L = 2490 mm to 3540 mm
Breadth B = 1450 mm to 1650 mm
Height H = 275 mm
Rail’s breadth S = 470 mm to 1000 mm
Wheel set’s wheel base a1 = 1000 mm
Roll set’s wheel base a2 = 1660 mm
Coupling’s height (by means of a hook) h1 = 210 mm
Height of the sprag coupling h2 = 200 mm
Road wheel’s (roll’s) diameter D = 220 mm
Minimum radius of the rail arc R = 8 m
Maximum velocity of transport (no load) on straight roads Vpp = 5 m/s
Maximum velocity of transport (with load) on straight roads Vtp= 1 m/s
Transport platform WPT.011
The transport platform WPT.011 is designed mainly for rail transport for horizontal and sloping transport ways of elements of sections of the mechanised linings and also mine face machines and other materials whose construction unables their transport in the horizontal position (when placed on the transport means). The abovementioned elements may be transported on the platform in the horizontal position only if their placement on the platform skid plate does not exceed the allowed transport clearance gauge.
All the elements that are transported by means of this platform should be properly fastened to it using the fastening points as stated by the platform producer or the ones produced on one’s own account (after the coordination with the producer) that will not weaken the platform’s construction and will not negatively influence its usage.
Any transport should take place according to the conditions given in the technical documentation (DTR), as well as the current procedures (the Ordinance of the Minister of Economy from the 28th of June, 2002, ‘Industrial safety, transport and specialist fire security in the underground mine plants’, Journal of Laws, number 139, year 2002, pos.1169 and Journal of Laws, number 124, year 2006, position 863).
The platform may be used in the underground excavations in ‘a’, ‘b’, ‘c’ –graded compartments (methane explosion hazard), as well as A and B class for the hazard of pulverised coal explosion.
Mine Office (WUG) admission GM-5/06
Maximum load capacity Qł = 60 kN
Length L = 3090 mm
Breadth B = 830 mm
Platform’s height (with stanchions) H1 = 1170 mm max.
Platform’s height (without stanchions) H2 = 423 mm max.
Rail’s breadth S = 600 mm
Wheel set’s wheel base a = 1000 mm
Coupling’s height h = 195 mm
Road wheel’s diameter D = 350 mm
Minimum radius of the rail arc R = 8 m
Maximum velocity of transport (no load) on straight roads Vpp = 5 m/s
Maximum velocity of transport (with load) on straight roads Vtp= 1 m/s
Transport platform WPT.012
The transport platform WPT.012 is designed mainly for rail transport for horizontal and sloping transport ways of the elements of sections of the mechanised linings and also mine face machines and other materials. It may also be used as a transport undercarriage which need to be mobile.
All the elements that are transported by means of this platform should be properly fastened to it using the fastening points as stated by the platform producer or the ones produced on one’s own account (after the coordination with the producer) that will not weaken the platform’s construction and will not negatively influence its usage.
Any transport should take place according to the conditions given in the technical documentation (DTR), as well as the current procedures (the Ordinance of the Minister of Economy from the 28th of June, 2002, ‘Industrial safety, transport and specialist fire security in the underground mine plants’, Journal of Laws, number 139, year 2002, pos.1169 and Journal of Laws, number 124, year 2006, position 863).
The platform may be used in the underground excavations in ‘a’, ‘b’, ‘c’ –graded compartments (methane explosion hazard), as well as A and B class for the hazard of pulverised coal explosion.
The platform’s technical data:
Mine Office (WUG) admission GM-48/06
Maximum load capacity Qł = 50 kN
Length L = 2550 mm to 3540 mm
Breadth B = 900 mm to 1650 mm
Height H = 260 mm to 275 mm
Rail’s breadth S = 470 mm to 1000 mm
Wheel set’s wheel base a = 1000 mm to 1750 mm
Coupling’s height h = 200 mm to 215 mm
Road wheel’s diameter D = 220 mm
Minimum radius of the rail arc R = 8 m
Maximum velocity of transport (no load) on straight roads Vpp = 5 m/s
Maximum velocity of transport (with load) on straight roads Vtp= 1 m/s
Transport platform WPT.013
The transport platform WPT.013 is designed mainly for rail transport for horizontal and sloping transport ways of elements of sections of the mechanised linings and also mine face machines and other materials whose construction unables their transport in the horizontal position (when placed on the transport means). The abovementioned elements may be transported on the platform in the horizontal position after the previous disassembly of stanchions. The transport by means of the platform may take place only if the clearance gauges are not exceeded.
All the elements that are transported by means of this platform should be properly fastened to it using the fastening points as stated by the platform producer or the ones produced on one’s own account (after the coordination with the producer) that will not weaken the platform’s construction and will not negatively influence its usage.
Any transport should take place according to the conditions given in the technical documentation (DTR), as well as the current procedures (the Ordinance of the Minister of Economy from the 28th of June, 2002, ‘Industrial safety, transport and specialist fire security in the underground mine plants’, Journal of Laws, number 139, year 2002, pos.1169 and Journal of Laws, number 124, year 2006, position 863).
The platform may be used in the underground excavations in ‘a’, ‘b’, ‘c’ –graded compartments (methane explosion hazard), as well as A and B class for the hazard of pulverised coal explosion.
The platform’s technical data:
Mine Office (WUG) admission GM-76/06
Maximum load capacity Qł = 120 kN
Length L = 2850 mm to 3540 mm
Breadth B = 640 mm to 1650 mm
Platform’s height (with stanchions) H1 = 1500 mm
Platform’s height (without stanchions) H2 = 405 mm
Rail’s breadth S = 470 mm to 1000 mm
Wheel set’s wheel base a = 1000 mm to 1200 mm
Coupling’s height (by means of a link) h1 = 266 mm
Coupling’s height (by means of a link and a hook) h2 = 245 mm
Coupling’s height (by means of a hook) h3 = 211 mm
Road wheel’s diameter D = 350 mm
Minimum radius of the rail arc R = 8 m
Maximum velocity of transport (no load) on straight roads Vpp = 5 m/s
Maximum velocity of transport (with load) on straight roads Vtp= 1 m/s
Transport platform WPT.014
The transport platform WPT.014 is designed mainly for rail transport for horizontal and sloping transport ways of elements of sections of the mechanised linings and also mine face machines and other materials whose construction unables their transport in the horizontal position (when placed on the transport means). The abovementioned elements may be transported on the platform in the horizontal position only if their placement on the platform skid plate does not exceed the allowed transport clearance gauge.
All the elements that are transported by means of this platform should be properly fastened to it using the fastening points as stated by the platform producer or the ones produced on one’s own account (after the coordination with the producer) that will not weaken the platform’s construction and will not negatively influence its usage.
Any transport should take place according to the conditions given in the technical documentation (DTR), as well as the current procedures (the Ordinance of the Minister of Economy from the 28th of June, 2002, ‘Industrial safety, transport and specialist fire security in the underground mine plants’, Journal of Laws, number 139, year 2002, pos.1169 and Journal of Laws, number 124, year 2006, position 863).
The platform may be used in the underground excavations in ‘a’, ‘b’, ‘c’ –graded compartments (methane explosion hazard), as well as A and B class for the hazard of pulverised coal explosion.
The platform’s technical data:
Mine Office (WUG) admission GM-61/07
Maximum load capacity Qł = 120 kN
Length L = 2550 mm
Breadth B = 800 mm to 1250 mm
Platform’s height (with stanchions) H1 = 1000 mm to 1600 mm
Platform’s height (without stanchions) H2 = 230 mm
Rail’s breadth S = 470 mm to 1000 mm
Wheel set’s wheel base a = 1000 mm
Coupling’s height h = 160 mm
Road wheel’s diameter D = 350 mm
Minimum radius of the rail arc R = 8 m
Maximum velocity of transport (no load) on straight roads Vpp = 5 m/s
Maximum velocity of transport (with load) on straight roads Vtp= 1 m/s
Transport platform WBA.003
The transport platform WPT.014 is designed mainly for rail transport for horizontal transport ways (angle slope <4) of mining locomotives accumulators.
Any transport should take place according to the conditions given in the technical documentation (DTR), as well as the current procedures (the Ordinance of the Minister of Economy from the 28th of June, 2002, ‘Industrial safety, transport and specialist fire security in the underground mine plants’, Journal of Laws, number 139, year 2002, pos.1169 and Journal of Laws, number 124, year 2006, position 863).
The platform may be used in the underground excavations in ‘a’, ‘b’, ‘c’ –graded compartments (methane explosion hazard), as well as A and B class for the hazard of pulverised coal explosion.
The platform’s technical data:
Mine Office (WUG) admission GM-99/07
Maximum load capacity Qł = 60 kN
Length L = 3200 mm
Maximum length of the loading space l = 2625 mm
Breadth B = 1100 mm
Foundation’s height for the accumulators
(for a platform with no load) H = 840 mm to 880 mm
Rail’s breadth S = 470 mm to 1000 mm
Wheel set’s wheel base a = 1000 mm
Coupling’s height
(for a platform with no load) h = 310 mm
Road wheel’s diameter D = 350 mm
Minimum radius of the rail arc R = 8 m
Maximum velocity of transport (no load) on straight roads Vpp = 3,5 m/s
Maximum velocity of transport (with load) on straight roads Vtp= 3 m/s
